Nov 022011

Sharper Impressions Painting wants to help you protect your home for the winter season. Thanks to a 6 year old paint technology, we are now able to apply most exterior paints and stains in temperatures as low as 35°F, allowing homes to be painted safely much further into the cooler Fall months.

A fresh coat of house paint in the Fall may also be your last chance to protect your home from moisture and impending wood rot that often festers during winter months. Failing to take the necessary steps to protect your home can be very costly. If a home goes unpainted through the Winter, you could end up with extensive wood damage that may cost thousands to repair or replace. Where wood rots, moisture creeps inside your home and can cause even more interior damage.  The easiest way to prevent this is with a fresh coat of paint before Winter weather sets in. A good paint job can usually protect most surfaces of your home for 10 years.  On some surfaces, quality paint will last even longer.

Repairing any current wood rot, caulking any holes or gaps, and painting done prior to Winter will also help save on heating bills throughout the winter months. By protecting and sealing these surfaces, it helps to insulate the interior and prevents excess heat from escaping your home.

Another advantage to painting your home this time of year is less foliage that could get in the way of painting all the surfaces.  Think of the largest tree or bush around your home; are the leaves and branches near the siding of the house?  In the Fall, these leaves are bare and because it is easier to paint, this labor saving move reduces the cost of your painting quote.

Be sure to ask about our gutter cleaning option.  For a minimal fee, we can clean your gutters of any leaves or debris to help prevent clogging of the gutters and downspouts.  When painting, we are already on site with our ladders, why not have us clean out your gutters for you?  It is safer and more economical then you climbing around your home and roof areas yourself.  (Average home only costs around $75)

Contact Sharper Impressions Painting today to discuss protecting your home from wood rot and the types of paint we can use to paint your house into the Fall. We can schedule a free and quick painting quote for you this Fall season!

number of view: 143
Posted by sharperi Tagged with: , , , , , ,
Jun 172010

What is the most important thing to look/ask for from a painting contractor?

REFERENCES, REFERENCES, REFERENCES! Ask for both old and new references to ensure the current quality of work and confirm that the painter has jobs that have lasted a long time.

It is critical to make sure the contractor has:

Before the painters start painting, be sure to confirm:

  • whether they are going to apply 2 coats or 1,
  • what brand and level of paint will they apply (you can buy good paint brands that have cheap paints or top quality paints, you get what you pay for in paint, so make sure your painter buys a top level product)
  • your home should be power washed (pressure washed) prior to painting,
  • preparation work should be detailed on your quote/contract,
  • exact price of the work should be clear and discuss any additional charges that may be added to a paint job like yours

How often should exterior paint be refreshed?

There are different general guidelines for renewing exterior paint

  • Decks 1-2 years
  • Fences 1-4 years
  • Trim on homes 5-10 years
  • Wood siding on home 5-10 years
  • Stucco 10+ years
  • Hardie plank or aluminum siding 10+ years

Why was it important for you to run a “green” company?

We are only renting this big blue planet and it is imperative we leave it as clean as we can for the next generation. Often, damages to the environment can be permanent; fortunately, painting your home does not have to cause any damage to you or the environment. Latex paints, (hardly any oil based paints are used anymore) are waterborne and the norm now for the residential repainting industry. Low VOC paints, which dry without harmful emissions, protect the home, the occupants and the air.

In the past year, my company has erased our server carbon footprint, gone nearly paperless in our office, operated temperature control units that turn off heating and cooling during down office times, installed energy efficient insulation and new skylights to reduce the amount of energy used for lighting and heating the office and warehouse.  Hopefully your painting contractor is doing his best to protect our environment also.

Why is prep work (preparation) so important?

90% of any good paint job is prep work; it makes the final paint job look good and last a long time

  • Power-washing – to ensure the surface is clean and the paint will stick. Click Here for more information.
  • Tape and tarp – to protect surfaces and create nice clean cut lines
  • Caulking – seals gaps and joints from weathering, bugs and makes the surface look solid and universal
  • Scrape – removes old paint so it doesn’t cause the new paint to flake/peel/blister
  • Prime – protects and seals the exposed wood grains, then has a nice smooth surface for the top coat to stick
  • Paint – always 2 coats, any color, will last twice as long, looks thick and rich

What are common reasons your interior needs repainted?

The most popular reason for painting an interior is to update/change the color of the walls.

Another reason is for upkeep. Some common reasons to freshen up are:

  • dents, scuffs, dirt, dust, animal hair, moisture stains, and faded walls from sunlight

The third biggest reason to repaint is to upgrade the quality of paint. When you repaint the walls with a top quality, deep, rich paint, the colors are deeper and the final result will look beautiful for a long time.

Ceilings usually last twice as long as the walls.  So often customers paint the ceilings every other time they get their walls painted.

  • Over time they yellow out from sunlight, and smoke/moisture/oils.
  • When you properly paint a ceiling, it can add an amazing amount of brightness to any room

Often a room’s trim, windows and doors will need painted as well. There are generally two reasons people choose to repaint these areas:

  • To freshen up the area that gets a lot of abuse from foot traffic, vacuum cleaners and everyday wear and tear.
  • To change an old, dated and dark wood trim color to an updated, fresh, bright glossy paint
number of view: 404
Posted by sharperi Tagged with: , , , , , ,
May 202010

Power washing (also called pressure washing) is defined as using a machine, wand and water to spray surfaces with high pressured H2O and sometimes chemicals to clean areas.

This is an imperative first step when preparing to paint or stain any part of a home. If a proper cleaning is not completed prior to painting, the new paint won’t stick to the surface and the new paint usually will peel off in big chunks and/or small flakes.

paint chips

Power Washing Overview

Power washing cleans and prepares surfaces that will be painted by removing dirt, mold, mildew, pollutants, pollen and dust. Power washing also removes most chalking that may have taken place. Chalking is the naturally occurring breakdown of the paints skin surface from sunlight ultraviolet rays.

Mold and MildewChalking

Using the right pressure washing machine will ensure the perfect preparation for exterior painting projects. The right amount of pressure will clean any surface, including wood, without causing damage. Also, using the proper nozzle will keep the appropriate angle and fan trajectory of water for each different surface. Experienced painting and power washing contractors will be able to prevent wand marks (or etching of the surface), which can be caused by too much pressure applied at the wrong angle.

Power Washing the Exterior

Often, a homes exterior will have dirt, mold, mildew, pollutants, pollen and dust; these all need to be removed prior to applying 2 coats of quality paint.

Cobwebs will be naturally present in the corners of many homes; most cobwebs and wasp nests will be washed away during the power wash, but some may stick and it is the job of a good painter to remove them by hand before later applying paint.

Paint chips will literally fly off the home while being power washed; however, a power wash will not remove all chips or peeling. Using too much pressure or applying pressure too close to the surface may result in unnecessary damage. The removed paint chips on the ground can be removed by hand once dry, by the painter. Also, a good painter will walk around your property to clean up any paint chips that may have landed around the homes yard, roof, landscaping and mulch beds during the power wash.

Stains are a tricky thing to try and power wash away. Simply put, power washing will not remove all stains around the home. Some stains are actually discolorations from years of weathering and will still be around even after a good power wash. After the proper preparation and two coats of fresh paint, the house will look great and fresh with any lingering stains covered and forgotten.

ext

Power Washing Decks and Fencesdeckstaining1

Decks and fences are often prime candidates for power washing; and both stand to benefit from the cleaning. Decks can be power washed with bleach or deck brightener to penetrate the wood fibers. This will wash away old stain and brighten up grey wood fibers caused by fence1foot traffic, sun and sitting rain water. Fences often have mildew on the surface that is caused by being a soft wood, and being so close to the ground and vegetation. Power washing will help remove these types of mildews and rejuvenate the look of any wood.

Chemicals

Some of the most common and best chemicals to use while washing the exterior of a home is water, bleach and tri-sodium phosphate. Other specialty chemicals do exist, but for the average project preparation, this will get the job done right. Many of the chemicals are organic which prevents harm to plants, lawns, flowers, and landscaping. The bleach is so heavily diluted with water; that the power wash should be like a spring rain storm to the shrubs and landscaping.

Dry Time

The time it takes for a home to dry after a power wash varies greatly on the humidity, rain and temperature. Usually, most homes can be painted within one day after power washing; although, the person who quotes the painting project, should walk the homeowner through a time table for the project.

Power Washing without Painting

For relatively low cost, a home’s exterior can be power washed to easily remove dirt and mildew. This cleaning will actually extend the life of an exterior paint job. Often, customers think their home needs a new coat of paint, when a simple power wash will give them the same desired result and add life to the current paint job. An honest and experienced painting contractor will inform the homeowner of this mistake instead of having them spend money on unnecessary work.

powerwashing2

Price

Power washing should always be included with a turnkey painting price quote. Any painter who does not instinctively want to power wash a home prior to painting, is not taking the necessary steps to ensure the paint sticks and lasts a long time.

Final Thought

Receiving the proper preparation and power wash (pressure wash) prior to an exterior paint job is essential to the life of the paint job. The information outlined above is a great reference to maintaining the look of the exterior. The process should be simple with the choice of an informed, professional, residential paint contractor.

For more information, feel free to visit our power washing page: http://www.sharperimpressionspainting.com/power-washing.html

number of view: 383
Posted by sharperi Tagged with: , , , , , ,